We have SEW-Eurodrive reducers, motors, gearboxes, and parts in stock.  Get a Quote for Replacement, Repair, or Rebuild today!

SEW-EURODRIVE is a manufacturer of power transmission and motion control products including gearmotors, frequency inverters, servo gears, motors, drive systems, industrial gearing, control technology, operator terminals, and industrial communications/interfaces. These products are used in applications such as bus positioning, flying saw, crane control, electronic cam, modulo positioning, storage/retrieval system, table positioning, winding calculator, and constant tension center winders in markets like automotive, airport, food, beverage, material handling, packaging, bulk material handling, forestry, lumber, and wastewater.

Midwest Power Products can supply the SEW-EURODRIVE products listed on this page and others on the SEW-EURODRIVE website.

SEW trade names: MOVITRAC, MOVIDRIVE, MOVIMOT, MOVI-SWITCH, MOVIGEAR, MOVIAXIS, MOVIFIT, MOVIPRO, MOVITRANS, MOVISAFE, VARIMOT, SPIROPLAN, TorqLOC

For a full list of SEW-Eurodrive products and their specifications, please reach out to us. Otherwise, continue below for more information regarding Gearmotors (Standard / Helical / Worm Gear), Motors, and Frequency Inverters.

Helical Gear Units/Helical Gearmotors

SEW Eurodrive offers a multitude of helical gearmotor ratios to meet your requirements and to optimize your space requirements. SEW Eurodrive offers a very diverse range of torque offerings and reduction ratios to fit your applications.

  • Single-stage or multi-stage
  • Foot-mounted or flange-mounted
  • Flange-mounted with extended bearing hub

RX series (single-stage)

Designed for high output speeds, the single-stage SEW Eurodrive gear units RX57 to RX107 offer a compact solutions for your system needs.

Technical data
Gear unit reduction ratio[i]3.21 to 289.74
Multi-stage gear unit reduction ratio[i]90 to 27001
Output torque[Nm] ([in-lb])31 to 18000 (270 to 159300)
Motor power range[kW] ([hp])0.09 to 160 (0.12 to 215)

R series (two-stage and three-stage)

SEW Eurodrive offers a great solution to those applications where weight is an issue. SEW’s multi-stage gear units (R07, R17, and R27) due to their die-cast aluminum are a lightweight solution to your gearing needs.

Technical data
Gear unit reduction ratio[i]3.21 to 289.74
Multi-stage gear unit reduction ratio[i]90 to 27001
Output torque[Nm] ([in-lb])31 to 18000 (270 to 159300)
Motor power range[kW] ([hp])0.09 to 160 (0.12 to 215)

RM series

Designed especially for agitating applications, the SEW Eurodrive RM gearmotors with extended output bearing hub are a special type of helical gearmotor. They allow for high overhung and axial loads and bending moments.

Technical data
Gear unit reduction ratio[i]4.29 to 289.74
Multi-stage gear unit reduction ratio[i]134 to 27001
Output torque[Nm] ([in-lb])270 to 18000 (2380 to 159300)
Motor power range[kW] ([hp])0.12 to 160 (0.16 to 215)

SEW Eurodrive Parallel Shaft Helical Gear Units/Parallel Shaft Helical Gearmotors

  • High Overhund Load Capabilities
  • High Torque Density
  • Perfect for Low Speed Applicatiions
  • Reduced Backlash Option Available

F series (two-stage and three-stage)

SEW Eurodrive’s parallel shaft helical gearmotors are extra slim and are the perfect solution when space is limited. The F Series Gearmotor is a great solution for conveying and material handling/processing applications. They are available in both Foot and Flange Mount, B5 or B14 Flange Mount, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.

Technical data
Gear unit reduction ratio[i]3.77 to 281.71
Multi-stage gear unit reduction ratio[i]87 to 31434
Output torque[Nm] ([in-lb])87 to 18000 (770 to 159300) (also in reduced backlash version)
Motor power range[kW] ([hp])0.12 to 200 (0.16 to 268)

SEW Eurodrive Helical Bevel Gear Units/Helical Bevel Gearmotors

  • 96%+ Gear Efficiency
  • Low Output Speed Capabilities
  • Reduced Backlash Option
  • High Torque Ratings
  • Long Service Life

K series (three-stage)

SEW Eurodrives offers a highly efficient (96%+) solution with their Helical Bevel Gear Units. These units are energy efficient and have a long maintenance free service life. They can be used in a multitude of applications utilizing AC asynchronous motor and synchronous servomotors. They are available in both Foot Mounted and Flange Mounted variations, B5 and B14 Flange Mounts, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.

Technical data
Gear unit reduction ratio[i]3.98 to 197.37
Multi-stage gear unit reduction ratio[i]94 to 32625
Output torque[Nm] ([in-lb])125 to 50000 (1110 to 442500) (also in reduced backlash version)
Motor power range[kW] ([hp])0.12 to 200 (0.16 to 268

SEW Eurodrive Helical Worm Gear Units/ Helical Worm Gearmotors

  • Low Noise Gearing Solution
  • High Overhung Load Capabilities
  • Economical Operation

S series

SEW Eurodrive’s helical-worm gear units are helical/helical worm combinations and are more efficient than a typical helical worm gear units. This unit by SEW is a great low cost/low noise solution for simple applications. They are available in both Foot Mounted and Flange Mounted variations, B5 and B14 Flange Mounts, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.

Technical data
Gear unit reduction ratio[i]6.80 to 288.00
Multi-stage gear unit reduction ratio[i]110 to 33818
Output torque[Nm] ([in-lb])43 to 4000
Motor power range[kW] ([hp])0.12 to 22

SEW Eurodrive Spiroplane Gearmotors

  • Low Noise and Economical Operation
  • Life Long Lubrication
  • Light Weight Aluminum Housing

W series

Spiroplan® gearmotors are right-angle gearmotors with Siroplan® gearing. This is a very short design and compact gearmotor. The gearing is wear free and the unit offers life long lubrication. Spiroplan® gearmotors can be mounted installed in any mounting position as the oil fill is independent of the mounting position. This gearmotor is available in foot and flange mount as well as B5 and B14 flange mount.

Technical data
Gear unit reduction ratio[i]3.20 to 75.00
Max. output torque[Nm]12 to 1101
Motor power range[kW]0.09 to 3.0

SEW Eurodrive Varigear / Varimotor Variable Speed Gearmotors

  • High Starting Torque
  • High Overhung Load Capabilities
  • Many Gear Ratio Options Available
  • Choice of Manual or Remote Speed Control

W series

The Varigear/Varimotor is SEW Eurodrive’s solution to variable speed drives with low output speeds and high output torque. They are available utilizing helical, parallel shaft helical, helical bevel and helical worm gear units.

Technical data
VARIGEAR®Maximum motor power [kW] ([hp])Possible power flowMaximum setting range for versions
 VentilatedNon-ventilated
VU / VZ 010.75 (1.0)U + Z1 : 6
VU / VZ 111.5 (2.0)U + Z1 : 81 : 6
VU / VZ 213 (4)U + Z1 : 81 : 6
VU / VZ 315.5 (7.4)U + Z1 : 81 : 6
VU / VZ 4111 (15)U + Z1 : 61 : 4
VU 5122 (30)U only1 : 6
VU 645 (60)U only1 : 4

SEW Eurodrive Motors

DR / DT/ DV AC Motors / AC Brake Motors

DR / DT / DV series AC motors and AC brake motors by SEW Eurodrive are a perfect match for SEW-EURODRIVE vertical gear units. Motors are offered in 2, 4, 6 or 8-pole or multi-speed. SEW-EURODRIVE brake motors have integrated DC safety disc brakes. SEW Eurodrive’s patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.

Technical data
Power range[kW] ([hp])0.09 to 200 (0.1 to 268)
No. of poles 2 / 4 / 6 / 8
Synchronous speed[rpm]750 / 1000 / 1200 / 1500 / 1800 / 3000 / 3600
No. of poles, variable 4/2 / 6/2 / 8/2 / 12/2 / 6/4 / 8/4
Frequency[Hz]40 to 60 (US Standard: 60)
Voltage[V]220 to 690
Enclosure IP54, and on request: IP55, IP65, IP56 and IP66

ASEPTIC DAS motors

  • .25 kW to 1.5 kW (0.33 hp to 2.0 hp)
  • No fan – pure convection cooling
  • Increased IP rating on motor enclosure
  • High corrosion and surface protection
  • Food grade gear oil optional

Technical data
TypePower [kW] ([hp]) in operating mode
 S1 = Continuous dutyS3 = Intermittent duty
  60%40%25%
DAS80K40.25 (0.33)0.3 (0.4)0.37 (0.50)0.55 (0.75)
DAS80N40.37 (0.50)0.45 (0.60)0.55 (0.75)0.75 (1.0)
DAS90S40.55 (0.75)0.75 (1.0)0.9 (1)1.1 (1.5)
DAS90L40.75 (1.0)0.95 (1.3)1.1 (1.5)1.5 (2.0)
DAS100M41.1 (1.5)1.35 (1.81)1.7 (2.3)2.2 (3.0)
DAS100L41.5 (2.0)1.85 (2.48)2.3 (3.1)3.0 (4.0)

SEW Eurodrive MOVITRAC® B frequency inverters

  • Simple operation and startup
  • High-quality system components
  • High power range across all supply voltage ranges

    MOVITRAC® B

    The Moitrac® B is SEW Eurodrive’s compact and inexpensive frequency inverter for power ranges of 0.33 to 100 HP. Single phase and three phase (230V) three phase (460V) available.

Technical data
Mains connectionPower range
230 V / 1-phase0.33 to 3.0 HP
230 V / 3-phase0.33 to 40 HP
460 V / 3-phase0.33 to 100 HP

MOVITRAC® LTE B

The SEW Eurodrive MOVITRAC® LTE B is a simple user friendly drive suited to simple applications.

Technical data
Mains connectionPower range
115 V / 1-phase0.5 to 1.5 HP
230 V / 1-phase0.5 to 3.0 HP
230 V / 3-phase0.5 to 5.0 HP
460 V / 3-phase1.0 to 15 HP

SEW Eurodrive MOVIDRIVE® MDX 60/61B drive Inverter

  • Multiple voltage capabilities
  • Extensive overload capacity
  • 4quadrant capability with integrated brake chopper
  • Extensive functionality and features

Technical data
Mains connectionPower range [kW] ([hp])
230 V / 3-phase1.5 to 37 (2.0 to 50)
460 V / 3-phase0.55 to 160 (0.75 to 215)

SEW Eurodrive MOVIMOT® Gearmotor with Integrated Frequency Inverter

The MOVIMOT® Gearmotor is SEW Eurodrive’s integrated gearmotor and frequency converter. It is designed to be used where space is tight. They are available as standard with IP54 enclosures and are available in IP55, IP65, and IP66 enclosures as options.

Technical data
Speed range [rpm]Voltage [V]ConnectionApprovalPower [kW] ([hp])Torque [Nm] ([lb-in])
280 to 14003 x 380 to 500 (400)StarIEC or cULus0.37 to 3.0 (0.50 to 4.0)2.52 to 20.5 (22.3 to 181)
290 to 2900 Delta 0.55 to 3.0 (0.74 to 4.0)1.81 to 9.9 (16.0 to 88)
280 to 17003 x 380 to 500 (460)StarcULus (NEMA motor)0.37 to 3.7 (0.50 to 5.0)2.08 to 20.7 (18.4 to 183)
280 to 17003 x 200 to 240 (230)Star-Star 0.37 to 2.2 (0.50 to 3.0)2.08 to 12.4